Through its direct involvement in 2 liter Formula car racing as one of the leading race engineering service providers,ANZE Engineering has developed many race inspired and improved components for its customers vehicles over the years. Now you can reap the benefits from years of their experience and development. ANZE offers a product line of race improved parts for Van Diemen Formula Cars.
Such as:
Side Pod Cable: Stainless Steel Mil Spec cable supports the lower side pod radiator support allowing the off road hit from a curb without breaking. Made to fit 1998 and up Van Diemen 2L and 1.6L chassis.
Front Camber Shims: Aluminum Camber shims made with an improved design to minimize the shims from being ejected. Made to fit 1998 and up Van Diemen 2L and 1.6L chassis. 64mm bolt centers.
Swirls Pot Bracket: 304 Stainless Steel sheet has been increased in thickness to minimize bending while uncapping the pressure cap. Made to fit 1998 and up Van Diemen 2L chassis.
Front Skid Plate: Made From 316 Stainless Steel angle. One of the toughest skid plates made. Run the car lower and get away with it. Made to fit 1998 and up Van Diemen 2L and 1.6L chassis.
Rear Camber Shims:Aluminum Camber shims made with an improved design to minimize the shims from being ejected. Made to fit 1998 and up Van Diemen 2L and 1.6L chassis. 100mm bolt centers.
TPS Bracket: Aluminum sheet metal bracket made to mount at the carburetor not the accelerator pedal. Made to fit FC 2L Weber carbs.
Front Skid Plate: Made From 304 Stainless Steel sheet metal. Tougher than the stock mild steel part. Run the car lower and don’t mind the occasional scrape. Made to fit 1998 and up Van Diemen 2L and 1.6L chassis.
Throttle Bracket: Made from 304 Stainless Steel sheet metal. Increased in thickness to minimize bending under full throttle applications. Made to fit 1998 and up Van Diemen 2L chassis.